On & Gone Mould Stain Remover (750ml)

Description

On & Gone™ effectively removes mould, mildew, and algae stains, and is also designed to deodorise wood. It can be applied to various surfaces, including ceilings, walls, roofs, tiles, grout, concrete, wood, drains, toilet bowls, baths, and showers. Additionally, On & Gone™ is suitable for solution-dyed acrylic fabrics but should not be used on silverware or aluminium. DO NOT mix with other chemicals. Approved for industrial, domestic, and institutional use.

DIRECTIONS:

1. Rotate nozzle to ON.
2. Always test the product on an inconspicuous surface first to ensure colourfastness.
3. Spray the affected area until it is saturated.
4. Leave for at least 5 minutes for antibacterial action or 15 minutes for fungicidal action.
5. For best results, apply on dry surfaces.
6. Scrub if necessary and repeat if needed.
7. Wipe excess product with a clean cloth or rinse with water.
8. For long-term protection, use AEGIS Microbe Shield® to prevent future mould, mildew, bacteria, odours, yeast, or algae growth for 6 months, or up to a year.

CAUTION:

Protect surfaces that could be discoloured or damaged by On & Gone™, as it may harm metals like aluminium, steel, and copper, as well as natural fibres such as wool, cotton, silk, and leather. DO NOT apply to these materials.

HAZARDS:

Causes severe skin burns. Causes serious eye damage. May cause respiratory irritation.

STORAGE:

Store upright in a cool, dark place, away from heat and direct sunlight. Store locked in a well ventilated place away from foodstuffs. KEEP OUT OF REACH OF CHILDREN AND UNINFORMED PERSONS.

DISPOSAL:

This product is highly toxic to aquatic life, so take care to prevent it from entering the environment. Rinse the container and render it unusable before disposal. Dispose of the product in accordance with local regulations.

PRECAUTIONS / WARNING:

Read the label thoroughly before use. Avoid handling the product until safety precautions are understood. Avoid contact with skin and eyes, and do not ingest. Do not inhale vapours or mist. Wear protective gloves, skin, and eye protection. Wash hands thoroughly after handling. Ensure good ventilation in the area. IF ON SKIN: Rinse with plenty of water. Remove contaminated clothing and wash before reuse. IF IN EYES: Rinse with water for several minutes, removing contact lenses if possible, and continue rinsing. Seek medical attention if irritation persists. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF INGESTED OR IRRITATION OCCURS: Seek medical advice or attention immediately. Contact a Poison Control Center or a doctor and show them the product label for treatment recommendations. FOR EMERGENCIES, CALL 0861 555 777.

Take back control of your spaces with On & Gone – the ultimate mould stain remover!

Order Now for Fast and Effortless Cleaning!